Windows and Linux System Update Package (SFUP) Installation and Operation 
Instructions

Intel highly recommends reading this document in its entirety before performing
the system update. Verifying that your system meets the documented requirements
will ensure a successful update and provide the most reliable system 
functionality after the update has completed.

 
Released - 1 September 2024

********************************************************************************
This update package includes the following production-signed package/SW versions and update utility version:

    System BIOS    R01.02.0002
    ME Firmware    06.01.04.047.0
    BMC Firmware   2.20-0
    FRU            0.07
    CPLD           v5p2
    sysfwupdt  	   16.0.9

********************************************************************************
    IMPORTANT NOTES
********************************************************************************
!! Firmware check is not applicable,  hence updates will be triggered even when 
   the versions in the system and in the SFUP package are same !!

!! Do NOT interrupt or reboot or remove power from your system during the update
   process. Doing so may render your system inoperable. !!

!! Do NOT attempt to down rev the system software once loaded on to the system.
   Doing so may render your system inoperable. !!

!! All updates provided in this package are installed using the Windows*
   and Linux* operating environment only. !!

!! Do not modify any of the script files. The scripts as written will provide 
   the most reliable update experience. !!
   
!! Refer to the userguide which is available in sysfwupdt folder for any update
   sceanrios or sysfwupdt commands. !!

!! R01.02.0002_CAPSULE_Customized_signed.cap file needs to be modified before 
   update. Otherwise update will fail !!

!! Added the "startup_CAP" script to update all FW components and BIOS 
   customization cap file !!

********************************************************************************
    SUPPORTED PRODUCTS
********************************************************************************

Intel(R) Server Board D50DNP Family.

********************************************************************************
    SFUP CONTENTS
********************************************************************************

Windows*: startup.bat and sysfwupdt\Win_x64 directory which contains sysfwupdt
          executable for Windows 64 bit OS.
Linux*  : startup.sh and sysfwupdt\Linux_x64 directory which contains
          installable .rpm for RHEL, SLES and UBUNTU
UPDATE  : bios_cap_update.bat, bios_cap_update.sh, bios_update.bat, bios_update.sh,
	  bmc_update.bat, bmc_update.sh, cpld_update.bat, cpld_update.sh,
	  driver_install.bat, driver_uninstall.bat, frusdr_update.bat,
          frusdr_update.sh, startup.bat, startup.sh, 
	  sysfwupdt_install.sh, sysfwupdt_uninstall.sh
BIOS	: R01.02.0002_DenaliPass_EBG_EMR_UpdateCapsule_prd.bin
BMC	: dnp-signed-OBMC-egs-2.20-0-g2ce4c5-39e80000-pfr-oob.bin
CPLD	: pfr_dnp_10m50_cfm1_auto_v5p2_prd.bin
ME      : NA
FD      : NA
FRU	: D50DNP1SB.fru, D50DNP1SBB.fru, D50DNP1SBS.fru
OtherFRU: NA
SDR 	: NA
CFG 	: fru_update_noprompt.cfg, master.cfg
PDF     : NA

********************************************************************************
    SYSTEM SOFTWARE REQUIREMENTS
********************************************************************************

To update the system software stack to the versions included in this update package,
the system software stack currently installed on the target server system MUST meet 
the following, or else the update may fail:
 
 - System BIOS   - production version  R01.01.0001 or later
 - BMC Firmware  - production version  1.13 or later
 - CPLD          - production version  V2P2 or later

********************************************************************************
    IMPORTANT INFORMATION FOR THE UPDATE PROCEDURE
********************************************************************************

- Windows : When startup.bat is executed, the update order is CPLD, BMC, FRU and
            BIOS followed by a system reset.
- Linux :   When "./startup.sh" is executed, it uninstalls existing sysfwupdt
            (if any) and installs latest sysfwupdt from SFUP. The update order
            is CPLD, BMC, FRU and BIOS followed by a system reset.

********************************************************************************
    GENERAL INSTALLATION PROCEDURE
********************************************************************************

1. Unzip the contents of the SFUP package to any directory.
2. Windows : from SFUP directory open a command prompt or powershell and execute
	     startup.bat
3. Linux  :  from SFUP directory open a terminal and execute "./startup.sh"
   
------------------------------------------------------------------------------

Please refer to the respective "Release Notes" files for complete list of known
issues, workarounds and detailed requirements: 

	- ReleaseNotesBMC_2.20.txt
	- ReleaseNotesFRU_0.09.txt
	- ReleaseNotesBIOS_R01.02.0002.txt
	- ReleaseNotesCPLD_5.2.txt